Sealey HVLP01 Bedienungsanleitung PDF herunterladen

 Locate the spray gun in a suitable work area. Keep this area clean and tidy and free from unrelated materials. Ensure that there is adequate

ventilation and lighting.

 Familiarise yourself with the application, limitations and potential hazards peculiar to the spray gun.

 WARNING!Disconnect the spray gun from the air supply before changing accessories, servicing or performing any maintenance.

 Maintain the spray gun in good condition (use an authorised service agent).

 Replace or repair damaged parts. Use authorised parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 Keep the spray gun clean for best and safest performance.

 Ensure that the compressed air system can supply the spray gun air consumption for the model to be used.

 Wear approved safety respiratory protection and safety eye goggles.

 If spraying isocynate based finisher, wear approved respirator/clean air breathing apparatus and cover exposed skin with latex gloves and

an impervious hooded coverall.

 Remove ill-fitting clothing. Remove ties, watches, rings and other loose jewellery and tie back long hair.

 Keep children and unauthorised persons away from the work area.

 When not in use, ensure that the air supply is turned off.

 Avoid unintentional operation of the spray gun.

 When not in use, disconnect the spray gun from the air supply, clean thoroughly and store safely.

 DO NOT point spray gun at yourself, other persons or animals.

 DO NOT direct air from the air hose at yourself, other persons or animals.

 DO NOT carry the spray gun by the hose, or yank the hose from the air supply.

 DO NOT exceed the working pressure of 43psi (3bar).

 DO NOT use the spray gun for any purpose other than that for which it is designed.

 DO NOT allow untrained persons to operate the spray gun.

 DO NOT get the spray gun wet or use in damp or wet locations or in areas where there is condensation.

 DO NOT operate the spray gun if any parts are missing or damaged as this may cause failure and/or personal injury.

 WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur. It

must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be applied

by the operator

INSTRUCTIONS FOR:

HVLP GRAVITY FEED SPRAY GUN

1.4

MM SET-UP

MODEL NO: HVLP01

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL

INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

1. SAFETY

2. INTRODUCTION

Gravity/suction feed spray gun designed for the professional workshop. Features air and paint ow controls for ne adjustment of spray pattern.

HVLP technology and precision engineering delivers consistant and unrivalled results. Suitable for water based paints.

3. SPECIFICATION

Model No: .................. HVLP01

Standard Set Up:................1.4mm

Air Pressure:. ................ 30-40psi

Air Consumption:...............14.5cfm

Pot Capacity: .................. 600ml

4. CONTENTS

HVLP01 Issue: 1 - 11/09/14

Original Language Version

Item Description Qty

1 Gun 1

2 1.4 Gun Head (MAX 10psi) 1

3 Pot (600ml) 1

4 Strainer 1

5 Universal Spanner 1

6 Adaptable Key 1

7 Socket (7mm) 1

8 Cleaning Pin (Ø0.57mm) 1

9 Cleaning Pin (Ø0.42mm) 1

10 Brush (A) 1

11 Brush (B) 1

4.1. Empty contents from the product carton on to a tray or bench. In the unlikely event of missing or damaged parts, inform your

Sealey dealer immediately.

4.2. The spray gun has been treated with an anticorrosive agent at the factory and MUST be flushed out thoroughly with thinner before use.

fig.1

1 2 3

Inhaltsverzeichnis

Seite 1 - HVLP GRAVITY FEED SPRAY GUN

 Locate the spray gun in a suitable work area. Keep this area clean and tidy and free from unrelated materials. Ensure that there is adequate vent

Seite 2 - 6. OPERATION

5.2. Air Supply Recommended hook-up is shown in Fig.2.5.2.1. Ensure the spray gun air valve (or trigger) is in the off position before connecting

Seite 3 - 8. TROUBLESHOOTING

FOR OPTIMUM PERFORMANCE IT IS VERY IMPORTANT TO ENSURE THE SPRAY GUN IS CORRECTLY CLEANED AFTER EACH USE.Disconnect from the air supply before attempt

Verwandte Modelle: HVLP731 | HVLP741 | HVLP742 | HVLP736 | HVLP02 | HVLP746 | HVLP774 | HVLP740 | SSG501 | S775G | SSG701 | SSG5 | SSG502 | SG6VC | S701G | S701 | SG4 | SSG1/G | SSG401 | SSG2 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Sealey HVLP01 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Sealey HVLP01 herunter. Sealey HVLP01 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: HVLP731 | HVLP741 | HVLP742 | HVLP736 | HVLP02 | HVLP746 | HVLP774 | HVLP740 | SSG501 | S775G | SSG701 | SSG5 | SSG502 | SG6VC | S701G | S701 | SG4 | SSG1/G | SSG401 | SSG2 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Sealey HVLP01