WARNING: Not to be used on Diesel engined vehicles.
✓ Wear approved eye protection.
✓ Operate the vehicle in a well ventilated area. Do not inhale exhaust gases or fuel vapour.
✓ Keep yourself, tools, and test equipment away from all moving or hot engine parts.
✓ Ensure the vehicle is in Neutral (manual transmission) or Park (automatic transmission), and that the parking brake is
firmly
applied. Block the drive wheels.
✓ Always keep a fire extinguisher suitable for fuel/electrical/chemical fires close by.
✓ Always turn ignition key to ‘OFF’ when connecting or disconnecting electrical components, unless otherwise instructed, and take extreme
caution when touching electrical components.
✓ Use a rag to cover fuel line fittings, when connecting or disconnecting fuel lines or gauges. Avoid contact with petrol.
✓ Dispose of all rags properly.
✓ Clean up all fuel spills immediately.
✓ Keep away from engine cooling fan. On some vehicles, the fan may start up unexpectedly.
✓ You must follow vehicle service manual cautions when working around the air bag system. If the cautions are not followed the air
bag
may
deploy unexpectedly, resulting in personal injury. Note that the air bag can still deploy several minutes after the ignition key is
turned ‘OFF’
(or even if the battery is disconnected) because of a special energy reserve module.
✓ Follow the vehicle manufacturer's warnings, cautions and service procedures.
✓ Always relieve fuel pressure before disconnecting fuel lines.
✓ The Fuel Injector Tester can be used in conjunction with an optional fuel pressure gauge for fuel injector testing. Always
follow all
safety guidelines and testing procedures contained in the instruction manual provided with the fuel pressure gauge.
✗ Never lay tools on vehicle battery. This may short the terminals together, causing harm to yourself, the tools, or the battery.
✗ Never smoke or have open flames near vehicle. Vapours from petrol and charging batteries are highly flammable and explosive.
✗ Never leave vehicle unattended whilst running tests.
✗ Do not confuse Air Conditioning schrader valves with the fuel rail test port.
✓ After testing, ensure all connections are restored.
✓ When finished with tester, store it in a safe, dry, childproof location.
Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection. Works with engine off,
and pulse timer may be used with fuel pressure gauge. Powered by vehicle's 12V battery.
Can be used to locate fuel system faults such as:
✓ Clogged or leaking fuel injectors
✓ Sluggish or sticky fuel injectors
✓ Wiring harness faults
✓ Fuel injector driver signal faults.
1. SAFETY INSTRUCTIONS
2. INTRODUCTION
INSTRUCTIONS FOR:
FUEL INJECTOR TEST
DEVICE 12V - PETROL
MODEL No: VS211.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY, AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY.
Original Language Version
VS211.V2 Issue: 1 - 28/06/10
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern