Sealey STR004 Bedienungsanleitung PDF herunterladen

 WARNING! Ensure that you read, understand and apply

Section 1 safety instructions.

3.1. Assembly

3.1.1. Unpack the product and check contents. Should there be any

damaged or missing parts contact your supplier immediately.

3.1.2. The wheel storage rack dismantles into 3 sections for ease of

loading and unloading (fig.1).

3.2. Loading

 WARNING! If loading only one or two wheels, DO NOT load

them on to the upper section with the lower section still

attached to the base section. This will affect the stability of

the wheel storage rack and may cause damage and/or

personal injury.

3.2.1. Ensure that the base section (fig.1-1) is positioned on level and

solid ground and all four castor wheel brakes are applied.

3.2.2. Attach the lower section (fig.1-2) to the base section (fig.1-1).

3.2.3. Start with the bottom level of the lower section (fig.1-2) and

insert the support pin as shown in fig.2.

Note: Ensure that the pin grooves sit in the narrow section in

the lower part of hole.

3.2.4. Fit a protecting support so that the recess in the body sits on the

support pin (fig.3).

3.2.5. Load the first vehicle wheel on to the lower section (fig.1-2) so

that it sits squarely on the protective support.

3.2.6. Insert a support pin (fig.2) into the top level of the lower section

(fig.1-2) and fit a protecting support (fig.3). Load the second

wheel so that it sits squarely on the protective support.

 WARNING! Use wheel storage rack on level and solid ground, preferably concrete. Ensure the floor over which the wheel storage rack

will be transported is swept clean.

 DANGER! DO NOT use on tarmacadam or any other soft surface as the wheel storage rack may sink or topple.

 DANGER! If a loaded wheel storage rack tips or leans STOP WHAT YOUR ARE DOING. MOVE QUICKLY TO A SAFE DISTANCE.

DO NOT TRY TO HOLD OR STEADY WHEEL STORAGE RACK.

 Use wheel storage rack in a suitable work area, keep area clean and tidy and free from unrelated materials. Ensure there is adequate

lighting.

 Before use, ensure that the size and weight of the wheels DO NOT exceed the capacity of the wheel storage rack.

 Maintain correct balance and footing when loading or moving the wheel storage rack. Ensure the floor is not slippery and wear non-slip

footwear.

 Observe correct manual handling techniques when loading wheels on to the wheel storage rack. If in any doubt, obtain assistance.

 Apply castor wheel brakes when wheel storage rack is stationary.

 WARNING! DO NOT use wheel storage rack if any parts are damaged or missing.

 DO NOT allow untrained persons to use the wheel storage rack.

 DO NOT get wheel storage rack wet or use in damp or wet locations or areas where there is condensation.

 DO NOT use the wheel storage rack when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 DO NOT use wheel storage rack for any purpose other than that for which it is designed.

 Before storing in safe area, ensure all parts are clean, free of grease and oil.

 WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions

and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into

this product, but must be applied by the operator.

INSTRUCTIONS FOR:

Vehicle Wheel Storage Rack - 100kg

Capacity

Model No: STR004

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATION

Model No: .........................................STR004

Overall Size (W x D x H):.................. 460 x 460 x 1165mm

Wheel Capacity: ......................................... 4

Maximum Rim Size: ................................. 225mm

Maximum Weight Capacity: ...............100kg (25kg per Level)

3. ASSEMBLY & USE

2.1. Introduction

Completely free standing wheel rack for all types of car wheels with rim size up to 225mm. Easy to assemble and no need for wall

hooks. Rack has 4 castors for easy manoeuvring around the garage. Eliminates tyre distortion due to loss of pressure. Supplied with rim

protecting supports.

2.2. Specification

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE

THIS JACK CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. RETAIN THESE INSTRUCTIONS FOR FUTURE USE.

Original Language Version

STR004 Issue: 1 - 18/07/12

fig.1

1 2

Capacity 1
4. MAINTENANCE 2

Inhaltsverzeichnis

Seite 1 - Capacity

 WARNING! Ensure that you read, understand and apply Section 1 safety instructions. 3.1. Assembly3.1.1. Unpack the product and check contents

Seite 2 - 4. MAINTENANCE

4. MAINTENANCE4.1. Keep the wheel storage rack clean and wipe off any oil or grease. 4.2. Periodically lubricate the castor wheels with oil. f

Kommentare zu diesen Handbüchern

Keine Kommentare

Sealey STR004 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Sealey STR004 herunter. Sealey STR004 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Sealey STR004