
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version
The Problem The Cause The Solution
Motor not turning No power Lift the on/off switch up to the 'on' position
Circuit breaker has tripped Re-set circuit breaker.
Check that electrical connections are correct
Fuses burnt out Replace fuse in plug and/or supply panel
Motor faulty / jammed Inspect motor. Retern to authorised repair
agent if necessary
Motor will not start with nozzel closed / off Insufcient voltage Check that voltage is not more than 5%
below the nominal requirment
Low or no ow Excessive suction pressure Lower the height of the pump in respect to
the tank and / or increase the diameter of the
suction tube
Suction tube resting on bottom of tank Raise suction tube
Low level in tank Rell the tank
Air entering the suction tube or in the pump Check all piping connections and the level of
fuel in the tank
Low rotation speed of motor Check and adjust the motor voltage or use
cable with a larger cross section
Check valve blocked Clean or replace
Tank ller clogged Clean or replace the lter
Pump lter clogged Clean or replace lter
Fluid leaks Check all connections and the condition of
rubber tubes
Meter chamber obstructed Clean the meter chamber
Meter not accurate enough Air in the suction line Check all seals and connections
Measuring chamber dirty Clean the meter measuring chamber
TP955.V2 Issue: 2 - 23/08/10
Kommentare zu diesen Handbüchern