Sealey AK9635D Bedienungsanleitung PDF herunterladen (Seite 1)

AK9635D.V2 - 1 - 170108

INSTRUCTIONS FOR

ELECTRONIC DIGITAL MICROMETER

MODEL NO:

AK9635D.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly main-

tained, give you years of trouble free performance.

IMPORTANT

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, AND

CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE, FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO

SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.

p WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when

using tools and equipment.

7 DO NOT use the micrometer if damaged.

3 Maintain the micrometer in good and clean condition for best and safest performance.

3 Keep the work area clean, uncluttered and ensure there is adequate lighting.

3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

3 Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery. Contain or tie back long hair.

7 DO NOT use the micrometer for any purpose other than for which it is designed.

7 DO NOT get micrometer wet or use in damp or wet locations, or areas where there is condensation. Keep micrometer clean

using a dry cotton cloth only.

7 DO NOT dip or submerge the micrometer in any type of liquid.

7 DO NOT expose micrometer to bright sunlight or dust.

7 DO NOT dis-assemble micrometer. The device must be checked by qualified service personnel only.

7 DO NOT apply any voltage to the micrometer i.e. with an electric marker pen.

3 The micrometer is a precision instrument, treat with care, avoid using force and do not subject to knocks or shocks.

3 Take particular care not to damage or scratch the scale surface.

3 Use micrometer in reasonably constant temperature conditions of approximately 20

3 When not in use, store micrometer in a safe, dry, childproof location.

3 Keep children and unauthorised persons away from the work area.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATION

7 Button digital micrometer with satin chrome thimble and sleeve. Large, easy to read 9mm high LCD read-out. Display switches

automatically between Metric and Imperial units. Zero display in any position plus take relative readings and tolerance readings.

Auto power off switch. Includes serial port connection for computer interface. Supplied with adjustment wrench and storage case.

1................Metric/Imperial conversion

2................Data hold

3................Relative/absolute measuring

4................Tolerance setting

5................Positive setting

6................Negative setting

7................Reset

8................Data output (Serial port)

SPECIFICATION:

Range: 0 - 25mm

Graduation: 0.001mm/0.00005

Battery: LR44 (1.5V)

Operating temp: 0 -- +40ºC

Storage temp: -20ºC -- +70ºC

Power supply: 1 x silver-oxide button battery (LR44 1.55V)

p WARNING! Ensure that you have read and understood Section 1 safety instructions before commencing.

3.1. Ensure all measuring surfaces are clean.

3.2. Origin setting. Use this function to preset the origin value. (Value can be anything from 0-25mm and can be used for

calibration purposes).

3.2.1. Press (RESET) and (-) buttons together and hold until “SET” begins to flash on the LCD.

3.2.2. Press the (+) or (-) button to preset the origin value as required. Now press (RESET) to confirm the setting.

3.3. Origin resetting. Use this function to calibrate the device using the preset origin value entered in step 3.2.

3.3.1. Ensure the measuring faces of the micrometer are in contact with the object being used to calibrate it and that the

measurement is precisely the distance required (i.e. identical to the preset origin value) and press (RESET).

3.4. To measure an object: open the micrometer by revolving the large barrel, place the object between the measuring surfaces

and close the micrometer using the smaller ratchet barrel (the ratchet is used to prevent over tightening which could other

wise result in inaccurate measurement, damage to the micrometer and damage to the object being measured). The reading

is taken from the LCD display.

3. OPERATION

6 7 8

FIG 1

1 2

AK9635D.V2 1
01284 703534 2

Inhaltsverzeichnis

Seite 1 - AK9635D.V2

AK9635D.V2 - 1 - 170108INSTRUCTIONS FOR ELECTRONIC DIGITAL MICROMETERMODEL NO: AK9635D.V2Thank you for purchasing a Sealey product. Manufactured to a

Seite 2 - 01284 703534

4. MAINTENANCE4.1. If the micrometer is not to be used for an extended period of time, remove the battery for storage.Note: The LCD will flash c

Kommentare zu diesen Handbüchern

Keine Kommentare

Modele	Rodzaj dokumentu
XD7500	Dokumentacja Dual XD7500 Specifications [en] , 12 strony
XDMA6540	Instrukcja Właściciela Dual XDMA6540 Owner`s manual, 38 strony
Axxera AXM230	Instrukcja Użytkownika AXM230 - Axxera Audio, 20 strony
XML8150	Instrukcja Właściciela Dual XML8150 Owner`s manual, 33 strony
XR4120	Instrukcja Właściciela Dual XR4120 Owner`s manual, 28 strony
XR4110	Dokumentacja Dual XR4110 Specifications, 12 strony
XDMA6370	Instrukcja Użytkownika XDMA6370 - Free Manual Downloads, 4 strony
XDM6810	Dokumentacja Dual XDM6810 Specifications, 16 strony
XDMA6540	Instrukcja Użytkownika Dual XDMA6540 AM/FM CD Player with MP3/Full iPod/iPhone, 2 strony
XD5250	Instrukcja Użytkownika XD5250 - Free Manual Downloads, 4 strony
XD5210	Dokumentacja Dual XD5210 Specifications, 16 strony
XDM6400	Instrukcja Właściciela Dual XDM6400 Owner`s manual, 32 strony
XML8110	Instrukcja Właściciela Dual XML8110 Owner`s manual, 23 strony
MXD105	Instrukcja Właściciela Dual MXD105 Owner`s manual, 32 strony
MXR42	Instrukcja Użytkownika INSTALLATION/OWNER`S MANUAL, 4 strony

Sealey AK9635D Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Messgeräte Sealey AK9635D herunter. Sealey AK9635D User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Dual XDMA6700 podręczniki

Dual XDMA6700 Instrukcja Użytkownika (24 strony)

Spis treści

Więcej produktów i instrukcji dla Odbiorniki samochodowe Dual

Sealey AK9635D Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Messgeräte Sealey AK9635D herunter. Sealey AK9635D User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Sealey AK9635D

Dual XDMA6700 podręczniki

Dual XDMA6700 Instrukcja Użytkownika (24 strony)

Spis treści

Więcej produktów i instrukcji dla Odbiorniki samochodowe Dual