Sealey VS8622 Bedienungsanleitung PDF herunterladen (Seite 15)

- Check if the brake tool’s EOBD connector is securely

connected to the vehicle’s DLC;

- Check that the park brake is released;

- Turn the ignition off and turn it back on 10s later;

- Repeat the process.

 If the “Activation Failed!” message does not go away,

then contact your local distributor or the manufacturer’s

customer service department for assistance.

 If a “The selected function is not supported!” message

shows on the display,

- Check that the park brake is released;

- Repeat the process.

3) If you wish to go to set the thickness of calliper, press Y button to

continue.

 If you do not wish to do the adaptation of calliper at this

moment, press N button or use UP/DOWN button to select

NO and then press Y to exit.

…………… Activate

Brake …….. .

Activation Done!

Go to Adaptation?

YES

4) Use UP/DOWN button to enter new pad thickness, and press Y

button to confirm.

........ Adaptation ...... ...

03 mm

[ ] or [ ] = Change

[N] = Exit, [Y] = Confirm

 If you want to quit the setting, press N button and a

“Command Cancelled!” message comes up.

VS8622_1.03_12/03/09

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Keine Kommentare

Sealey VS8622 Bedienungsanleitung Seite 15