
4
. OPERATING INSTRUCTIONS
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
KempsonWay,SuffolkBusinessPark,
Bury St. Edmunds, Suffolk,
IP327AR
www.sealey.co.uk
Web
email
Original Language Version
AE900 Issue: 1 -
25/07/11
For general erasing, clean dry air at pressures of 30 to 45psi. may be used.
4.1 Ensure the air hose coupling is attached to a compressor or air line.
4.2 Unscrewthegravityfeedpotlid(g.1B).
4.3 Fillpot¾fullwithabrasivematerial(aluminiumoxide),replacelidandscrewdownsecurely.
4.4 Regulate air pressure for erasing on paper surfaces to approximately 30psi. Use a higher air pressure of
45psi for metal, gold castings, plastic or glass work.
4.5 Hold the air eraser the way you would a pencil and press the trigger to start using the air eraser. Move
the air eraser with the Tip about 12.5mm to 3mm above the work surface. Adjust to achieve results
desired.
4.6 AdjustControlScrew(g.1A)tochangetheamountofabrasivematerialused.Screwtolowestpointto
avoid excessive use of abrasive.
4.7 For work requiring fast, heavy abrasion, use a higher air pressure. Hold tip of the Air Eraser very close to
the working surface to cut faster. Hold at a distance for blending and broad coverage.
NOTE: Expectaslighttrickleofabrasivetoowoutaftertriggerisreleased.Thisiscausedbyairpressurein
the cup being relieved.
4.8 Keep the air eraser free from dirt and dust.
Fig.1
Kommentare zu diesen Handbüchern