
INSTRUCTION MANUAL FOR:
Thread Repair Master Kit
MODEL No: TRMK
1. SAFETY INSTRUCTIONS
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS
INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. INTRODUCTION
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
DO NOT use tools if damaged.
DO NOT use this tool for purposes other than for which it is designed.
Maintain tools in good and clean condition for best and safest performance.
Ensure that a vehicle which has been jacked up is adequately supported with axle stands.
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.
Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair.
Keep children and unauthorised persons away from the work area.
DO NOT use the thread repair set when you are tired or under the influence of alcohol, drugs or intoxicating medicine.
Account for all tools and parts being used, DO NOT leave them in or near an engine. Return all parts to the case and store this in a
safe, dry, childproof location.
WARNING! Failure to comply with these instructions may result in damage to the thread repair set or work piece and/or personal injury.
WARNING! The warnings referred to in this guide cannot cover all possible conditions and situations that may occur. It must be understood
that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
Suitable for five common sizes of thread. Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal
threads. Protects tapped threads against wear and damage. Set includes drill bits, thread taps, insert installation and lug breaking tools. Supplied
in metal storage case.
TRMK Issue No: 1 - 16/03/12
Original Language Version
3. CONTENTS
Item Description Part No. Item Description Part No.
1 Twist Drill 5.2mm TRM5.04 14 Screw Tap M10x1.5 TRM10.01
2 Screw Tap M5x0.8 TRM5.01 15 Installation Tool TRM10.02
3 Installation Tool TRM5.02 16 Breaking Pin Tool TRM10.03
4 Breaking Pin Tool TRM5.03 17 Twist Drill 12.5mm TRM12.04
5 Twist Drill 6.3mm TRM6.04 18 Screw Tap M12x1.75 TRM12.01
6 Screw Tap M6x1.0 TRM6.01 19 Installation Tool TRM12.02
7 Installation Tool TRM6.02 20 Breaking Pin Tool TRM12.03
8 Breaking Pin Tool TRM6.03 Thread Insert 5mm TRM5R
9 Twist Drill 8.3mm TRM8.04 Thread Insert 6mm TRM6R
10 Screw Tap M8x1.25 TRM8.01 Thread Insert 8mm TRM8R
11 Installation Tool TRM8.02 Thread Insert 10mm TRM10R
12 Breaking Pin Tool TRM8.03 Thread Insert 12mm TRM12R
13 Twist Drill 10.5mm TRM10.04
Kommentare zu diesen Handbüchern