Sealey VS8221 Bedienungsanleitung PDF herunterladen (Seite 10)

Page 10

Original Language Version

VS8221 Issue:2(I) - 06/08/13

3.1. The Imager Head and Cable Installation

To use the tool, the imager head and cable must be connected to the display

unit. To connect the cable to the display unit, make sure that the key and slot

(Fig.4) are properly aligned. Once they are aligned, tighten the knurled knob to

holdtheconnectionrmlyinplace.

Fig.4

3.2. Accessories Installation

Accessories include a magnet and a mirror (Fig.2). Both are attached to the

imager head in the same manner. Hold the accessory and the imager head as

shown in Fig.5.

Fig.5

Screw the accessory onto the tip of the imager head.

Fig.6

3. Installation and Connection

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Keine Kommentare

Sealey VS8221 Bedienungsanleitung Seite 10