Sealey AK9999 Bedienungsanleitung PDF herunterladen

2. INTRODUCTION & SPECIFICATION

1. SAFETY

INSTRUCTIONS FOR:

MINI LASER LEVEL UNIT

MODEL No: AK9999.V3

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used

according to these instructions and properly maintained, give you years of trouble free performance.

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND

WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY

CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.

PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1.1. GENERAL SAFETY. Read instructions carefully before using the laser level.

 DO NOT use this device in direct sunlight.

 DO NOT allow the level to get wet.

 DO NOT allow unqualified persons or children to operate this device.

1.2. LASER SAFETY. The AK9999.V3 utilises a Class II laser that emits a low level of visible radiation

(i.e. a wavelength of 650 nanometres) which is safe for the skin but not inherently safe for the eyes.

The Class II emission limit is set at the maximum level for which eye protection is normally

afforded by natural aversion responses to bright light. Accidental eye exposure is therefore

normally safe, although the natural aversion response can be overridden by deliberately staring into

the beam, and can also be influenced by the use of alcohol or drugs.

 DO NOT direct the laser beam at any person’s (or animal’s) eyes as eye damage could result



DO NOT operate the laser level when you are tired or under the influence of alcohol, drugs or

intoxicating medication.



Be aware that reflections of the laser beam from mirrors or other shiny

surfaces can be as

hazardous as direct eye exposure.

Approved by VOSA for the calibration of Sealey HBS97 Headlamp Beam Setter. Mini tripod can be placed on

bonnet or any surface of the test area. Laser dot indicates if beam setter is in or out of calibration. Also suitable for

other levelling applications

and features a magnet on base for attaching to ferrous surfaces.

SPECIFICATION:

Model No: .................................................AK9999.V3

Laser Power:

..................................................

≤

1mW

Wavelength:....................................................650Nm

Accuracy:......................................................1mm/m

Batteries: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2xAAA (Supplied)

Original Language Version

AK9999.V3 ISSUE:1 05/12/13

1 2

Inhaltsverzeichnis

Seite 1 - AK9999.V3

2. INTRODUCTION & SPECIFICATION1. SAFETYINSTRUCTIONS FOR:MINI LASER LEVEL UNIT MODEL No: AK9999.V3 Thank you for purchasing a Sealey Product. M

Seite 2 - g.1 g.2

Environmental Protection Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be so

Kommentare zu diesen Handbüchern

Keine Kommentare

Sealey AK9999 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Sealey AK9999 herunter. Sealey AK9999 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Sealey AK9999