Sealey FJ48 Bedienungsanleitung PDF herunterladen (Seite 1)

1.1. GENERAL SAFETY

 Visually inspect the jack before each use to ensure it is sound and fit for use. Take action for immediate repair or

replacement of damaged parts. Use genuine parts only. The use of improper parts may be dangerous and will

invalidate the warranty.

 WARNING! If any part of jack fails to work properly, discontinue use and have repaired or replaced. Never attempt

to repair jack while it is under load.

 WARNING! Ensure the jack is supported on a suitable base so it will not slip, shift or sink during operations. Ensure

the load is properly supported on the lift point to prevent shifting. If required, use appropriately rated clevis pins,

chains, bolts, ropes etc, through beam holes to assist operation.

 Place complete lifting toe of jack under object to be lifted. You can pull the lifting head up to the point of lift (or strain)

without pumping handle.

 Always lock and/or stabilise the load to be lifted. The jack will not act as a load stabiliser.

 Always keep a firm grip on pumping handle and support beam.

 DANGER! Ensure that the lifting head climbing pin is located and locked in a hole in the steel beam before

releasing the pumping handle otherwise the lifting head will automatically lower, causing the handle to move up

and down rapidly presenting a risk of serious or fatal injury.

 All persons shall be clear of load being raised, lowered or pulled. Never work under a raised load without using

additional supports such as axle stands. As an extra precaution insert a M12 steel bolt (not included) through hole

in steel beam immediately below lifting mechanism, to act as a safety pin.

 WARNING! If you exceed rated capacity, the shear pin will break and the handle will drop.

 DANGER! Jack must have a minimum load of 50kg (110lbs) to activate the lowering step by step, otherwise lifting

head will drop.

Ensure there are no persons or obstructions beneath a load before lowering.

 DANGER! DO NOT use additional devices on handle to provide extra leverage. Use hand power only.

 DO NOT allow untrained persons to operate the jack.

DO NOT operate the jack if damaged.

DO NOT exceed the rated capacity of the jack, see specification below.

 WARNING! DO NOT place an excessive strain on load, equipment or supports when using jack for pulling or

tensioning.

DO NOT push lifted load off jack.

 DANGER! DO NOT use the jack for any purpose other than for which it is designed.

Put handle in upright position before tripping the reversing latch to lower load.

KEEP JACK CLEAN AND OILED. Front and back of rail must be kept rust free. Store in a safe, dry childproof

area.

1.2. JACKING UP A VEHICLE

IMPORTANT: Apply safety instructions as in 1.1. above with the following additions or exceptions:

DO NOT jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.

DO NOT work under the vehicle until axle stands have been correctly positioned.

 DO NOT allow the vehicle to move while supported by the jack, or use the jack to move the vehicle.

 Place chocks under wheels of vehicle.

 Ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or “PARK” if automatic).

 Ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc., to allow for

vehicle tilting.

 Only place jack under those lifting points recommended by vehicle manufacturer (see vehicle hand book).

DANGER: Use the jack for lifting only, NOT for supporting the lifted load.

 Use suitable capacity axle stands under the vehicle before proceeding with any task.

Ensure there are no persons or obstructions beneath the vehicle before lowering.

 Check the lifting point is stable and correctly positioned on the lifting pad.

 Ensure there are no passengers in the vehicle.

 Keep children and unauthorised persons away from the work area.

INSTRUCTIONS FOR:

FARM JACKS

MODEL No's:

FJ48.V3 & FJ60.V2

1. SAFETY PRECAUTIONS

Heavy-duty cast steel lever-ratchet operated jacks with

reversible ratchet mechanism enabling them to be used

for lifting or lowering. Versatile and lightweight unit also

suitable for pulling tree stumps and tensioning fences as

well as a positioning aid for heavy machinery. Fixed upper

jaw, adjustable on beam, allows jack to be used as a

clamp.

2. INTRODUCTION & SPECIFICATION

Specification ...................................FJ48.V3 .....FJ60.V2

Max. Jacking Load@ <300mm Lift: ..................3000kg ......3000kg

Max. Jacking Load@ 300-500mm Lift: ................2250kg ......2250kg

Max. Jacking Load@ >500mm Lift: ...................1600kg ......1600kg

Min. Height: .....................................130mm ......130mm

Max. Height: ....................................1050mm .....1320mm

Min. Lowering Load: .................................50kg ........50kg

Maximum Pull Load:...............................2250kg ......2250kg

Maximum Clamp Load: .............................340kg .......340kg

Weight: ...........................................14kg ........15kg

FJ60.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

Original Language Version

FJ48.V3, FJ60.V2 Issue No: 1 - 16/11/11

1 2

Inhaltsverzeichnis

Seite 1 - FJ48.V3 & FJ60.V2

1.1. GENERAL SAFETY Visually inspect the jack before each use to ensure it is sound and fit for use. Take action for immediate repair or replace

Seite 2 - 3. OPERATING INSTRUCTIONS

fig.1fig.23.1. VERTICAL LIFTING WARNING! Before lifting ensure Section 1 safety instructions are read and understood. 3.1.1. Before lifting asses

Verwandte Modelle: FJ60

Kommentare zu diesen Handbüchern

Keine Kommentare

Sealey FJ48 Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Sealey FJ48 herunter. Sealey FJ48 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: FJ60

Kommentare zu diesen Handbüchern

Sealey FJ48 Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Sealey FJ48 herunter. Sealey FJ48 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: FJ60

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Sealey FJ48