Sealey VAG505 Bedienungsanleitung PDF herunterladen (Seite 42)

3) If the test has been initiated by the vehicle, a confirmation

message will be displayed on the screen.

Figure 5.33

 Some vehicles do not allow scan tools to control vehicle

systems or components. If the vehicle under test does not

support the EVAP Leak Test, an advisory message is

displayed on the screen.

Figure 5.34

4) Wait a few seconds or press any key to return to previous screen.

5.9 Viewing Vehicle Information

The Vehicle Info. function enables retrieval of Vehicle

Identification No. (VIN), Calibration ID Nos. (CINs),

Calibration Verification Nos. (CVNs) and In-use Performance

Tracking on 2000 and newer vehicles that support Mode 9.

1) Use UP/DOWN scroll button to select Vehicle Info. from the

Diagnostic Menu and press OK button. (Figure 5.3)

Component Test

Command Sent!

Press any key to continue

.............Component Test

The selected mode is

not supported

Press any key to continue

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 79 80

Keine Kommentare

Sealey VAG505 Bedienungsanleitung Seite 42