Sealey SDM30 Bedienungsanleitung PDF herunterladen (Seite 4)

PROBLEM POSSIBLE CAUSE(S) SOLUTION

Excessive noise 1. Incorrect belt tension 1. Adjust tension

2. Spindle is dry 2. Disassemble spindle/quill and lubricate

3. Pulley is loose 3. Tighten pulley

4. Bearing damaged 4. Replace the bearing

Excessive drill wobble 1. Chuck is loose 1. Tighten the chuck by pressing it against the table (see 5.1.6. to 5.1.8.)

2. Bearing or spindle shaft is worn 2. Replace worn part

3. Chuck is worn 3. Replace the chuck

Drill binds in the 1. Feed pressure is wrong 1. Apply less pressure

workpiece 2. Belt is loose 2. Adjust tension

3. Drill is loose 3. Tighten the drill with the key

4. Speed is too fast 4. Change the speed

Drill burns or smokes 1. Speed is too fast 1. Change the speed

2. Chips are not discharging 2. Clean the drill

3. Drill bit is dull 3. Use a new bit

4. Lubrication needed for work 4. Lubricate while drilling

5. Feed pressure is wrong 5. Apply less pressure

Table is difficult to move 1. Lubrication is needed 1. Lubricate with light oil

9. TROUBLESHOOTING

8.1. Clean the tool after each use. A coat of automobile-type wax applied to the table and

column will help to keep the surfaces clean.

8.2. Blow out any dust that may have accumulated in the motor.

8.3. Periodically lubricate all moving parts.

8. MAINTENANCE

7. DRILL SPEEDS

Drill Speed (rpm)

Drill Dia. (mm)

Steel Cast Iron Iron Alum. & Copper

3 1820 2580 2580 2580

5 1290 1350 1350 2580

6 970 1290 1290 2580

7 830 970 970 2580

8 830 970 970 2580

9 500 970 830 1820

10 500 830 830 1820

11 500 830 830 1820

12 420 830 500 1820

13 420 500 500 1350

14 420 500 500 1350

16 320 500 500 1290

18 320 420 420 1290

20 280 320 320 970

22 210 320 280 970

25 120 280 210 830

fig.5

The chart below shows recommended drill speeds for various bit diameters and materials.

Select the available drill speed that is the same as, or nearest to, the one recommended for

the task in hand.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

Original Language Version

1350 1820 1820 2580

SDM30.V2 Issue: 3 - 13/09/12

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Sealey SDM30 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Sealey SDM30